CRC Zinc It is a weld through single component zinc-rich compound that offers the same advantages as hot-dip galvanising by forming a highly-protective coating with 95% highest purity zinc on bare steel or iron surfaces. It is ideal for repairing damaged galvanised surfaces or as a convenient and easy-to-apply alternative if hot-dip galvanising is not available.

The zinc particles fuse directly to clean metal and form an electro-chemical bond that – due to sacrificial anodisation of zinc – stops rust and rust creepage even when scratched abraded or dented.

The quick-drying tough coating is resistant to salt corrosion water and heat and makes CRC Zinc It the premium product if long-term protection in harsh conditions and highly corrosive environments is required.

CRC Zinc It provides excellent cover and is capable to be applied as a heavy film for extra protection without forming runs. Delivered from a unique aerosol system giving a smooth even coat.

Ongoing protection can be achieved through simple re-coating within 6 years depending on conditions. Protection in extreme conditions may require re-application more frequently.

CRC Zinc It can act as a finish coat on clean iron steel and their welds. Top-coating CRC Zinc It with another product of CRC’s Zinc coating range provides extra protection and a selection of bright metallic or coloured gloss finishes – the ultimate choice for your application.

If other colours are required CRC Zinc It can be top-coated with most standard decorative paint systems for metals.

• Zinc-rich – 95% highest purity zinc in the dried film fuses directly to iron or steel surfaces
• Weld through - Zinc It provides a unique coating that can be welded through
• Same advantages as hot-dip galvanising – Exceptional rust protection
• Excellent adhesive qualities – Forms a tough coat for long-term protection
• Easy application – High film build in one step
• Heavy-duty – Resistant to salt corrosion water and heat. Powerful protection in harsh conditions
• High Heat Resistance – Up to 500°C
• Long-term corrosion protection – Corrosion Protection Factor 72 (up to 6 years outdoors depending on conditions)
• Sacrificial anodisation of Zinc – Stops rust and rust creepage even when scratched abraded or dented
• Fast drying – Touch dry in 20 minutes recoat at any stage full cure in 24 hours
• Easy re-application over existing film and/or clean surfaces – For ongoing protection
• Finish coat – Can act as the finish coat no need for primer
• Excellent primer – May be over-coated with most standard protective paint systems for metal
• Does not contain CFCs methylene chloride
• Excellent weldability
• MPI Approved C23